9600 Service Manual - gmecorp-usa.com

6 Image Storage
4/30 FPS SCSI DISK SETUP
NOTE: The Access Level 2, Prepare CINE Disk command when used with an
IP-SCSI option does not check for disk media errors nor does it
correct for disk errors.
The procedure assumes the IP-SCSI sub-system is already installed in the
electronics box.
SETUP PROCEDURE, FIRST TIME IP-SCSI
INSTALLATION
In Access Level 2, the Prepare CINE Disk command must always be run
after:
Line Frequency (Hz) is changed in the Set Configurations menu
Cine Disk parameters are changed in the Set Configurations menu
A new or different SCSI disk drive is installed.
1. Insert the OEC access disk.
2. Press Setup Options keyboard.
3. The screen displays:
SETUP OPTIONS
Set Today's Date
Set the Correct Time
Software ID Screen
Access Level 2 (Service)
4. Select Access Level 2 (Service), then press ENTER.
5. The screen displays:
Service Options
Run System Diagnostics
Prepare CINE Disk
Backup MainFrame Disk
Video Calibration
Access Mainframe Menu
Shot Log File
System Configuration
6. Select System Configuration, then press ENTER.