Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

• Helping the staff configure the Well-Contact Suite software, allowing them to:• Simplify the creation of the graphical interface for the supervision of the Well-Contact system's thermostat, at least for realising themonitoring windows that are usually made for users.• Reduce the time of creation of the graphical interface for the supervision of the Well-Contact system's thermostat, at least forrealising the monitoring windows that are usually made for users.• Automatically recognize the devices linked to the access control of the Well-Contact system activating the Well-Contact Suitesoftware modules dealing with the management.• Allow the automatic creation of "thematic views" of the devices installed within the Well-Contact system environment.Such thematic views have been made for the monitoring graphical windows that are typically made for supervising the automationsystems of hospitals and hotels.• Provide default user interfaces with the specific features of the Well-Contact system's thermostat that give an intuitive representation of thefeatures of the thermostat itself.• Provide the software user with "thematic views" of the main features of the devices installed in the premises, trying to facilitate the interpretationof the data provided by the devices and facilitate their control.Detail view of the thermostatThe Well-Contact Suite software offers a window that lists all of the features of Vimar's Well-Contact system's thermostat (the graphical symbols of all thethermostat's datapoints are also available, as expected for all KNX devices).In the chapter The Well-Contact system's thermostat setting window such window is described in detail and appears as shown in the picture below.Note. The previous picture shows the main features of the thermostat, while the remaining can be displayed "expanding" their "panels."8