Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

The "Reload from ETS Configuration" buttonThe "Reload from ETS Configuration" button is located at the bottom left of environment's detail window, and allows you to reload the data related to thedevices, from the ETS configuration.In that regard, here follows a description of the process of creation of the graphical pages.1. After performing the "ETS Configuration" for the first time, when the"ETS Configuration" window is closed, the data relating to the systemstructure and devices are processed by Well-Contact Suite software with the purpose to create the graphical structures that shall constitutethe graphical user interface for the supervision of the system.The graphical structures that are created can be summarized as follows:a. Summary and "thematic" views of the real and virtual environments that make up the representation of the system itself (e.g.summary view of the rooms, view of the thermostats inside the rooms, summary view of the common areas, view of thethermostats inside the common areas, view of the zone masters,…). In these views, the graphical objects summarizing the statusof the main devices and features that can be managed in all the environments are included.b. Detail views of the real and virtual environments that the building is made of and that contain the automation system devices (e.g.,detail view of the rooms, detail view of the common areas, detail view of the zone masters,…). In these views, the graphical objectsrepresenting the individual devices/addresses/objects present inside the environment are included.2. At this point, the data structure of the graphical representation of the system (which was created with the ETS configuration information), isdissociated from the data structure created by the ETS configuration.All modifications and customizations made to the structure of the graphical representation of the automation system are not going to changethe structure of the ETS configuration.3. If you need to re-import system data from ETS (e.g., as a result of an expansion of the automation system), or when the ETS configuration ofthe system needs changing, you can still "synchronize" the system data with those of the structure of the graphical representation, through theWell-Contact Suite software. To do this, use the button "Reload from ETS Configuration".193