Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

GeneralFrom the window that appears, selecting the tab "General", you can set:• Client detail background.• Customizing the icon displayed on the top bar of the Well-Contact Suite Software.• Enabling/Disabling the display of the telegrams from the BUS, on the status bar of the software.• General setting of temperature the unit of measurement used by the software.These settings are described in the next few chapters.User detail background.Through this section you can define which image should be displayed by the software in the user (customer) detail window (see "Client Detail Window").This image is displayed in all user tabs as a background, when additional personal data tab is minimized.Such function can also be used, for example, to display the company logo.Setting the background imagePress "Upload - Change Background".The window for selecting the image appears. After selecting the desired image, press "Open" to confirm the setting, otherwise press "Cancel" to cancelthe setup without changing the background image.Deleting the background imageTo restore the white background (default image), press "Clear Background".Enabling/Disabling the display of the telegrams from the BUS, on the status bar of the softwareFrom the status bar of the software (on bottom right) you can view the last telegram arrived from the BUS.To do that, activate the option "Show BUS telegrams on the status bar".This feature has been scheduled for diagnostic purposes, allowing the installer to verify the arrival of messages from BUS.44