Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

EnvironmentsIntroductionThe Well-Contact Suite software provides, as already noted above, the ability to view summary symbolic representations of the main features of the automationsystem devices contained in the environments of a facility.These representations can be selected via the buttons to set "thematic views", as described above.The symbols representing the environments, apart from the thematic view, take a color depending on the status of the environment.The following table lists the possible statuses of an environment, in the zones view, with their descriptions.color Status DescriptionEnvironment in "normal condition"Alarm in environment (level 1 or 2)Alarm in environment (level 3 or 4)View of the environment in "normal condition", in absence of alarms.There was a level 1 or 2 alarm in the environment.The alarm is in the status of "unresolved".There was a level 3 or 4 alarm and there are no active alarms of level 1 or 2 in theenvironment. The alarm is in the status of "unresolved".The thermostats view (Temperature)It is the view where each environment is represented by a symbol that sums up the status of the main features of the thermostat, or thermostats, whichare inside it.To select the summary view, press the "Temperature" button from the area including the buttons for setting "thematic views", as shown in the picturebelow.In the "Temperature" view, for the representation of the environments is used a symbol that sums up the status of the main features of the thermostat, orthermostats, which are inside it.The appearance of the symbol is not customizable and some of the statuses to be displayed may not appear because in this specific system such featureis not present or has not been configured correctly.71