Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Deny a card rights to access all environmentsYou can quickly and easily deny a card the right to access all environments of the accommodation (configured in the Well-Contact Suite software).To do this, left click (only once) the "Remove access for all environments" button highlighted in the following picture.After pressing this button all the rows related to the common areas will no longer be highlighted and will take the color white, as shown in the picturebelow.Setting access times for common areasThe access time to common areas for the staff is set in the same way as for users. Refer to the chapter "Setting access times for environments" of the"User Detail" subsection.Type of cardThe Well-Contact system provides seven types of cards (or rather seven types of users) that can be handled by the access control system.The transponder readers recognize the type of user assigned to the read card, and the Well-Contact system provides the management of these differenttypes of users.Below is a table with these types of users:• User• Service• Maintenance• Installer• Security• Assistant• AdministratorThe descriptions are indicative and not related to any particular function.There are still seven types of users that can be distinguished by the transponders readers used by the Well-Contact system designers to create certaintypes of automation.The following picture shows the menu through which you can set the type of user for the card assigned to the staff member.141