Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

4. After confirming the creation of the new functions master, the new "Functions master" (with the name assigned at creation) appears in theENVIRONMENTS section and the "Selected Functions Master Detail" section displays the related information.With reference to the "Selected Functions Master Detail" displayed in the previous picture, here follows the description of the displayed fields:a. Associated Functions Master. It is the name that's been assigned to the functions master during the creation procedure.b. ID Letter. It is a letter of the alphabet that must be set to identify the functions in those windows of the Well-Contact Suite softwarewhere there is no room to display the entire name string.Examples of values ​for this field are: A, B, C, D…c. Commands Execution Timing It is the time interval, in seconds, between the sending of two subsequent commands (related tothe execution of a master). For details related to the way a "Functions Master" works, refer to the chapter "Functions Master".NOTE: If, when creating a zone master, a "double" thermostat is involved (art. code 14430 Plana, 16915 Idea; 20430 Eikon), which was ETSconfigured as a double thermostat, it is necessary to choose which thermostats must be associated to the master (only A, only B, both A+B)To make this choice, after entering the thermostat in the master, select the thermostat in the event master and choose the desired option from the5 After defining the basic data of the functions master, you must proceed with the association of the functions master with all the Addresses/Objects you want to be part of it.This is accomplished with the so-called drag & drop (typical of Windows applications).Specifically, to associate an address/object to a functions master, follow these steps:a. In the section "ADDRESSES/OBJECTS" of the "ETS Configuration" window, locate the thermostat you want to associate with thefunctions master.If the desired address/object is not visible, expand the levels of the addresses/objects tree structure pressing the '+' symbol relatedto the hierarchically higher items than the desired address (or "double click" them).See the following picture.98