Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

In the graphical symbol you can distinguish the following three areas:• Top horizontal barThis area shows the status of the data reported in the following table.Graphical Data DescriptionEnvironment number.Name of the environmentEnvironment AlarmsIt's the number of the environment.Please note that for the proper functioning of the Well-Contact software you'll need to configureall environments numbers during the configuration of the Well-Contact Suite software.It is a text field that displays the name of the environment (if you have entered it during the configurationof the Well-Contact Suite software).This data can be displayed or hidden using the "Show optional description" button ( ).If an alarm event occurs, associated with the environment, you'll see an icon for the type ofalarm that occurs.If multiple alarm events occur simultaneously, only one symbol is displayed, starting fromthe one indicating the most serious alarm (depending on the level assigned, during theconfiguration, to the specific alarm).Only after the higher priority alarm event has been solved, the symbol of the next (in terms ofseverity) alarm will appear.The following alarm symbols are provided:• : Request for assistance from the customer• : Fire Alarm• : Technical alarm• : Intrusion Alarm• : Flooding danger alarm• : Temperature is too high alarm• : Temperature is too low alarm• : Service in room request alarm• Area of the ​symbol for the opening status of the windows in the environmentThis area is shown in the following picture.The symbol of an open window appears (in the environment are closed.) if at least one of the windows in the environment is open. No symbol appears if all the windowsNote : In order for the above statuses to appear, it is necessary that the Well-Contact devices are configured correctly during the setup of the systemthrough KNX ETS and, where required, during the next phase of the Well-Contact Suite software configuration.Access to the detail view of the environmentSelecting (left clicking) the symbol representing an environment, you'll access the "detail view" of the environment. The "detail view" of the environment isdescribed in the chapter "The detail view of the environment".Detail view of the custom environmentIt is the view that represents the environment in detail, relating to the devices installed on the Well-Contact system.As mentioned previously, in the description of the "summary thematic views" of the environments, you'll reach the detail view of an environment selecting(left-clicking) the related summary symbol seen in any of the thematic views described in the previous chapters.From the detail view of an environment you can then go to the detail view of the next and previous environment through the "previous" and "next" buttons,as will be described below.The detail view window of an environment appears as shown in the picture below:75