Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Detail view of the scenarioIt is the view representing the scenario in detail.As mentioned previously, in the description of the summary view of the scenarios, you'll reach the detail view of a scenario selecting (left-clicking) therelated summary symbol.The appearance of the detail view of a scenario is shown in the picture below.To activate the scenario, press the button "Enable".To exit the window without activating the scenario press "Exit".The "Events List" subsectionTo access the "Events List" sub-section, go to the "Supervision" section (by pressing the "Supervision" button) and then press the "Events List" button.Through this subsection, you can view, and possibly export to MS Excel file format (.xls), the set of events that the Well-Contact Suite software is able tostore.To facilitate the consultation of all data, it has been divided into several categories, displayed in the respective lists.Possible events list can be seen in the following table:Graphical List Name DescriptionAccessesPresence ofLoginCommandsSearchIn this list is the environments access data, sent by transponder readers.In this list is the presence in the environment data, sent by pocket transponder readers.In this list is the Well-Contact Suite software access data.In this list are the commands that the Well-Contact Suite software sent to the automation system.Pressing this button opens a window through which you can search for events on the active list.Note: from the configuration menu you can define the period after which the Well-Contact Suite software erases all stored data (events), allowing the systemmanagers to maintain the history of such data for the selected period (refer to the chapter General parameters configuration - Log).The appearance of the "Event List" sub-section is shown in the picture below.104