Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

As mentioned previously, the windows for sending commands to functions masters contain input fields required for the actual deviceswindows, but do not contain fields designed to display the status.Consequently, for the description of the command fields of this window, refer to the thermostat one, as described in detail in the chapter Thethermostat setting window of the Well-Contact system.The first time you open the command window of a functions master of a thermostat, or at least if no changes were carried out and then saved.the numeric fields contain default values.Below is the description of the buttons at the bottom of the window:a. "Undo Operation" button This button exits the functions master control window without sending or saving any changes made onthe same fields.b. The "Save" button This button allows you to save all settings data of the current functions master. This command can be usefulin the following two cases:• You want to save your settings so you can later send them to the real thermostats associated with them.• You want to save the new settings so they can be used as the default for the real thermostats associated with them, that havebeen assigned that functions master as "default".101