Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

In the "ETS Connection Manager" window the following areas can be distinguished:• Configured connections. This area displays the list of the created connections. By default, the connections are created via KNX/RS232 andKNX/USB interface (as shown in previous picture).You can create new connections selecting "New".You can delete the connections selecting "Delete" after selecting the connection you want to delete.Selecting a connection from the list, the related configuration parameters will be displayed in other areas of the window.• Properties. In the properties area, the following parameters are displayed and can be modified:• Name: it's the name you want for the connection, which appears on the list of connections in the "Configured Connection” area.• Type: it's the type of connection used, which can selected among those currently available through a menu.• Default: selecting this field (displayed with an 'x') the connection which is currently selected (on the list of connections in the"Configured Connection” area) is set as the default interface.• Communication Parameters. In the "USB device" field, if the communication with the interface is established correctly, you will see theinterface ID.Address/Object Type ConfigurationIntroductionThe Well-Contact Suite software provides a configuration section through which you can define how the software should handle, as a general approach,the different types of KNX addresses/objects that were imported from the ETS project. Such settings are "general", meaning that when the Well-ContactSuite software finds an address/object, it manages it, in the first instance, according to the settings explained in this chapter. This avoids the need to setall the addresses of the same type.For example, if you want certain types of addresses linked to sensors (which are in all hotel rooms) not displayed as objects in the room monitoring views,but you want to use them only to trigger alarm events, simply deny the visibility of the specific address/object in the "Address/Object Configuration" dialog.Configuring the parameters of addresses/objects of a specific environment you can, however, change the general settings in a "timely" way (overriding thegeneral settings for that particular address/object).The "Address/Object Configuration" dialogLog on to the "Address/Object Configuration" section from the menu "Settings" as described in the following picture.The window shown in the picture below appears.185