Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Creating a functions masters of the "Address/Object" typeA functions masters of the "Address/Object" type may be regarded as a virtual Address/Object associated with a real set of Addresses/Objects to be controlledsimultaneously. The virtual Address/Object settings will be sent to all the real addresses/objects associated with it.To create a new "functions master" of the "Address/Object" type, proceed as follows:1. Right-click the row corresponding to "Functions Master".2. Select "New Functions Master"The following window appears.3. In the "Name" field, enter an alphanumeric string that identifies the name of the functions master and select the type of functions master youwant to create "Address/Object".Specify the type of address/object selecting it from the "Address/Object Typology" according to the type of address/object from the whole setof addresses or objects you want to control simultaneously.Please note the addresses or objects MUST be the same type and MUST perform the same type of action.In the example shown in the picture below you are creating a functions master of the "Address/Object" type, to simultaneously change the setpoint value of the comfort mode (for the heating) of the thermostats of all the hotel rooms.The same thing, for example, could be done to control (as if acting on a single switch) all the lights in the pool of the hotel.To continue with the creation of the functions master press "Confirm", or press the "Cancel" button to cancel the creation of the functions master.97