Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

The "Exit" buttonThe following picture displays the "Exit" button, located on bottom right of the "ETS Configuration".Pressing "Exit" you'll exit the " ETS Configuration" window.When you exit the "ETS Configuration" window, the Well-Contact Suite software does the following:• Saves and/or updates the configuration data of the automation system devices.• Creates graphic structures for supervising the automation system.Entering KNX system dataIntroductionWe're now going to describe the sequence of operations required to enter all the configuration data of the Well-Contact Suite software.1. Import of ETS project data2. Integrating project data imported from ETS.3. Changing the topology of the system imported from ETS. These operations are described in detail in the next few chapters.Import of ETS project dataThe first import of the files created from ETS3.As mentioned previously, the Well-Contact Suite software can obtain most of the information necessary for system supervision from files obtained fromETS3. Refer to chapterAppendix B: Exporting system configuration files from ETS3 for details about the different files that must be exported from ETS3 and the procedure toobtain them.To import the system configuration files, previously exported from ETS3, follow these steps:1. Start the ETS files import procedure selecting "Import".The following window for entering the data (name and path) of the files to be imported appears.113