Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

4. Define the logical conditions that generate the alarm event (refer to Chapter Definition of logical conditions for a detailed description of theconfiguration window of the logical conditions).Press the button "Define Logical Conditions" to display the configuration window of the logical conditions.Note: If the alarm condition is generated by the value of a single address/object, you must still use the window for configuring the logicalconditions, although it will be sufficient to create a single logical expression, similar to what described below (assuming, for example, you wantto set up a technical alarm generated by a single address that takes the value 1 when an alarm takes place and 0 in standby):a. Create a new expression in the OR conditions area, selecting "Add Condition". A new row appears in the list of the OR conditions.b. Set the left side of the logical expression. Right-click the left Address/Value (in the same row as the new created expression) andselect "Enter Address" from the menu that appears.c. The window with the tree address appears, where you can select the one you want, after expanding the corresponding branches.162