Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Area of ​the "Detail view of the environment"It is a true representation of the environment where graphical symbols representing the devices physically present in the automation system are inserted.If you have previously made changes to the view of the devices or addresses/objects via the "Edit" button, you will see the following:• Thermostats. The graphical objects representing the "Vimar thermostats" are displayed. These graphical objects, as described in the specificchapters, display the main data of the thermostats. The data shown in this view are the following:• measured temperature• set temperature• operating mode• possible manual setting through the buttons on the thermostat (if enabled): changing of the temperature (within the set range) andmanual changing of the fancoil's speed.• Addresses/objects that have been associated with the environment and have been set as "Visible" addresses/objects sin the "Address/ObjectConfiguration" window.The default view has the following features:• All graphical symbols are placed alongside each other, starting from the top left of the window.• All graphical symbols are made of an icon (the one set in the "Address/Object Configuration" window) and a description field (in the case of thethermostat the description field is formed by a proper description and a field with the main operation data).• The background of the window is uniformly white.The "Move" buttonThe "Move" button is located at the bottom left of the environment's detail window, and provides access to the "Move" and "Resize" functions of thedevices/addresses/objects graphical symbols.Note: Once activated, and then after entering the edit mode of the graphical objects, this button is replaced by the "Save" button, which exits the editmode keeping the changes made (see chapter Moving and resizing the devices/addresses/objects graphical symbols).191