Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

The control of the devicesThe Well-Contact Suite software allows you to send commands to devices, allowing a complete interaction with the devices of the automation system.To control a device, left-click the icon of the device.• Konnex On/off type devices. For all devices whose status is given by one of two values ​On, Off (or, equivalently, Active/Inactive,… ), thestatus of the device is provided through the variation of the look of the corresponding icon and, if enabled, also by the description of the statusitself.Left-clicking the icon of the device, you'll send the command set during the configuration.Examples:For an address that must control an actuator (e.g. to switch on and off a light), every click sends a command to change the status: switchingfrom On to Off and vice versa.For an address that must trigger an electric lock, each click will always send the command On (to be managed by a dedicated device forcontrolling an electric lock)• Konnex group type Devices/Addresses (of different type from the On/Off). Depending on the type of device (group object/address) awindow is displayed with the control options offered by the specific device type (Konnex group object/address).• Thermostat type devices. For all the devices of the thermostat type (of the Well-Contact system), left-clicking the correspondent graphicalsymbol, you'll open the window for the management of the thermostat of the Well-Contact system.This window gives you complete control of the features of the thermostat.All the features of the thermostat have been divided into panels, grouped according to their possible frequency of use.Then follows the window to set up the thermostat, as it appears right after activation; the most commonly used two panels are displayed: theStatus panel and the Settings panel (related to the current seasonal mode).The window panels can be “expanded” (making them visible and usable) or “collapsed” (making them invisible and unusable) acting,respectively, on the “expand” ( ) and “collapse” ( ) icons that appear on the right of the title bar of the panel.The following picture shows the “expand” icon of the Fancoil speed advanced management panel.82