Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

3. Create a list of addresses/objects whose value you want to read and write. To do this, you need to find such addresses in the tree of theaddresses on the left and "drag" them (one at a time) to the right (which will serve as a list of addresses/objects to test).After these operations, the window "Action" will look as shown in the picture below (after "dragging" three addresses).The columns in the list of addresses have the following meanings:a. Address: Address of the objectb. Description: description associated with the addressc. Type: KNX EIS type of address/objectd. Value: value of the address/object. To view this value you must first read it clicking the button corresponding to the column "Read"for the row of the address you want.e. Date/Time: date and time of the last reading/writing operation.f. Value to write: the text field where you can edit the value for the corresponding address.Note: to complete the sending of the data you need to press the button "Write".g. Write: It's the column with the buttons to write the values of the addresses ​in the list.h. Read: It's the column with the buttons to write the values of the addresses ​in the list.4. After reading the addresses in the list, the window will look as shown in the following picture.225