Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

• (Check-in) time. Time of arrival of the user (time of the beginning of validity).The time (hours and minutes) of arrival representing the default general time of arrival, can be set from the "General" tab in the "Generalsettings" window, which can be activated selecting "General Configuration Settings" from the "Settings" menu, (described in the chapterGeneral parameters configuration).You can enter values ​other than the default left-clicking the "Check-in time" field on the desired reservation and entering the desired time usingthe setup window.The situation is shown in the following picture.After selecting the location shown in the previous picture, the window to set the time is displayed, as shown in the following picture.To change Hour and Minutes you can select the "up"/"down" arrows in the Hour and Minutes fields, or you can select the desired field andtype in the desired value.To confirm the time change, press "Ok", while to cancel the editing operation, press the "Exit" button.• Check out. Date of user departure (or the end of validity)To change this information, left-click the field "Check-out", similarly to what we saw for editing the user's day of arrival.After selecting the location shown in the previous picture the window for setting the date (year, month and day) is displayed. Make the desiredchanges and press the "Confirm" button. The current day is displayed inside a dark orange box, while the day to be set is highlighted by alight orange box.32