Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

If the writing on the bus keeps returning an error, check:a. The correct physical connection of the bus to the computer where the Well-Contact Suite Office software is installed, through theappropriate interface.b. The correct configuration of the Well-Contact Suite software.5. If writing ends in a positive way, the Well-Contact Suite software shows the new status of the card: "Enabled" as shown in the picture below(Card detail title bar). The card is operational."Replace Card" buttonThe "Replace Card" button allows you to activate the process of creating a card to replace a card previously created for the staff, which has, then, thestatus of "Active".The "Replace Card" button creates a new card with the same rights of access as the selected one.The previous card is disabled.This is useful if the staff member claims to have lost his card and asks for another.The newly created card will have the same rights of access as that previously assigned to the staff member; the old card assigned to the staff member willbe inactive in any case. That way if someone finds the previous card of the staff member, they won't have access to any environment.To replace a card, proceed as follows:1. From the list of cards associated with the staff member, select the card you want to replace.2 Insert a card into the card programmer.The writing procedure permanently erases all data on the card, which will be replaced by the current ones.Press the "Replace Card" button as shown in the picture below.144