Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

2. Proceed with the association of all environments that you want to associate with the master.Are all the associated rooms and related master functions created automatically are visible. By expanding the branches of individual functionsmasters, you can view all devices/addresses/objects associated with each functions master.3. After completing the association of the environments you can eventually delete the functions master that have been created automatically, butyou don't care to manage.To delete unwanted functions master, right-click the row corresponding to the master you want to delete and select "Delete the selectedobject" from the menu that appears.4. It may happen that within a functions master automatically created there are some devices/addresses/objects you do not want to controlthrough the related functions master.To delete unwanted items from a functions master associated with a zone master, right-click the row corresponding to the item to delete andselect "Delete Selected Object" from the menu that appears.5. After obtaining the desired structure of the functions master associated with the zone master, proceed with the name change either of theother configuration parameters, or of the functions masters created automatically by the Well-Contact Suite software (by selecting the functionsmasters and modifying their data in the "Associated Functions Master Detail" section, within the "Selected Zone Master Detail" section).After you are done editing the configuration data of the functions master, the structure of the ZONES section will look as shown in the picturebelow.IMPORTANT NOTE: the described methods may also be used in combination to achieve the desired configuration. It is possible that forcertain given system configurations and control requests it is convenient to apply two or even three of the methods described above, to get theconfiguration done in the shortest time.Deleting a zone masterTo delete a new zone master proceed as follows:1. Right-click the row corresponding to the zone master you want to delete.2. Select "Delete the selected object" from the menu that appears.86