Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Changing the configuration of a scenarioTo change the configuration of a scenario, proceed as follows:1. Select the scenario you want to delete, choosing it from the list of created scenarios, as shown in the picture below.In the window the current configuration of the scenario appears, as shown in the picture below.2. Make the changes you want, choosing one or more from the list below:a. Editing the configuration parameters of a command (or action). Select the desired command (In the "action list" section),corresponding to the column of the parameter to modify and change the parameter itself, as described in Creating a scenario.b. Adding commands (or actions). Drag the new addresses from the ADDRESSES/OBJECTS section to the "action list" and makethe necessary settings, as described in the chapter Creating a scenarioDeletion of a command (or action). Select the command toerase in the "action list" section and press the "Delete Command" as described in Creating a scenario.c. Changing the execution order of scenario commands. Select the command whose execution order you want to change (withrespect to other commands in the scenario) and change its position using the "move up" or "move down" buttons, as described inCreating a scenario.3. After making any necessary changes, press "Save Changes", as shown in the picture below.To undo the changes made during the session, press the "Cancel Changes" button.134