Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

An access card may have different status, highlighted by different graphical symbols and described in the following table.GraphicalsymbolStatusNot RecordedActivatedLockedStatus descriptionThe card was created at a logical level. It exist in the Well-Contact Suite software database but has not yetbeen programmed (physically) and it has not been activated (the data concerning the access of the card hasnot been sent to the automation system yet).The access provided for this card is still not allowed.The card was created at a logical level.The card has been programmed (physically).The card has been activated.The access provided for this card is allowed.It is a card that was active, but then all access initially scheduled for this card was (temporarily) locked.All rights of access provided for this card have been revoked.The "Add Access Card" buttonThe "Add Access Card" button allows you to create (from a "logical" point of view) a new access card associated with the staff member."Logical" point of view means that the card currently exists (with all rights of access and association with the staff member) only in the software database,but the automation system still does not recognize the card and related access privileges.Pressing the button "Add access card" creates a new card with the same rights to access as the card selected from the list of staff access cards.It is, in effect, a "duplicate card" function. You can change the rights of access of the cards from the area reserved for ​the access cards details, as will bedescribed below.The "Delete access card" buttonThe "Delete access card" button allows you to "delete" the access card selected from the list of cards associated with the staff member.The "Delete" option does the following:1. Deletes the card from the software database from a logical point of view2. If the card has already been activated, informs all devices in the access control system that the deleted card no longer has any rights ofaccess.It practically removes all rights of access on all access control system devices.NOTE: The deleting operation does not require to reprogram the card. An access card can be deleted without being (physically) available.Duplicate card creationTo create the duplicate card for a staff member, which is already present in the list of access cards associated with the staff member, proceed as follows:1. Select the card you want to duplicate from list of the access cards associated with the staff member. The selection is done left-clicking thegraphical symbol corresponding to the card to duplicate.2. Press the "Add Access Card" buttonThe newly created card will be a duplicate of the selected card in the sense that it has the same rights of access.Note: To activate a card, as will be described below, you must press the "Write Card" button from the detail area of this card.133