Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

The "DEVICES" sectionIn the following picture, the "DEVICES" of the "ETS Configuration" window are highlighted.In the "DEVICES" section, all the "modeled" devices that have been approved during the import of the automation system configuration files exported byETS are listed.The "DEVICES" section has the following functions:• Viewing all "modeled" devices imported from the ETS project.• List of devices to be used for "manually" creating/editing the topological representation of the automation system.• Creating the functions mastersViewing all "modeled" devices imported from the ETS projectIn the "DEVICES" section, all the modeled devices imported from the ETS project are displayed.The modeled devices are divided by type and displayed via a tree structure.List of devices to be used for "manually" creating/editing the topological representation of the automation systemIf the information related to the topological structure of the system (definition of the various rooms, floors, buildings) has not been entered in the ETS project,in whole or in part, you can do that via the "ETS Configuration" window of the Well-Contact Suite software.As seen in previous chapters, in the "ZONES" section you can create the zones into which you want to divide the topological structure of the system(buildings, floors,…). In the "ENVIRONMENTS" section you can create environments which can then be placed inside their respective zones.Through the "DEVICES" section, described in this chapter, you can place the devices that appear in the list of devices inside the environments displayed inthe "ENVIRONMENTS" section, through "drag and drop:1. Left-click the device you want to place inside the environment (in the "DEVICES" section).2. Holding down the left mouse button, "drag" the device to icon of the desired environment, in the "ENVIRONMENTS" section.You will see a yellow arrow corresponding to the environment you're selecting.3. Release the left mouse button.The device's icon, with its description, will appear under the representation of the desired the environment.All addresses associated with the device placed inside the environment will be included in the list of addresses/objects of the environmentitself.104