Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

3. To read the data of the card inserted into the controller at the time, select "Read Card".After a while, if the card is read successfully, the window will look as shown in the picture below.The data displayed is described below:a. Card Code: it's the code the software automatically assigns to each programmed card.b. Card Type: The Well-Contact automation system provides seven types of card, which can be used by the Service Provider tocreate automatism in the system.The Well-Contact Suite software assigns the "User" type to all cards created for the users and allows to choose the type (amongthe remaining six) for cards such as "Personal".c. Owner: If the card is currently associated with a person (user or staff member), it displays their name and last name.d. Owner Type: It's the type of user to whom the card is assigned (User or Staff Member)e. Card ID: If to the card holder have been assigned multiple cards, the ID card is the index of that user's card (the first card of thatuser has ID 1, the second has ID 2, and so on).f. Card status: it's the activation status of the card (or the status of the user to whom it's been assigned).Note: The card can be active even if the user is in "Overtime". In any case, that card will not have access to the rooms.223