Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

The "Restore Default" panelThrough the "Restore default" panel you can:• Reset default setpoint settings at user's check-out Enabling this field, the Well-Contact software will alter the values ​of the setpoint of thethermostat in question, using the values ​stored on the functions master associated with the thermostat in question as default at the check-out(if the thermostat in question has been associated with a functions master by default during the "ETS Configuration" procedure).Enabling this feature, regardless of the setpoint value changes made at the user's request, the Well-Contact Suite software will restore all of thethermostat setpoints (using the default set by the system administrator).In the text field, the possible default functions master associated with the thermostat, which cannot be changed, is indicated.• Enable thermostat management via associated masters Enabling this field allows the Well-Contact Suite software to change the values ​of the thermostat parameters in response to an "implementation" of one of the masters associated with that thermostat (if the thermostat inquestion has been associated with at least one master (in control) during the "ETS Configuration" procedure).• Default Values. This section shows the values ​of the parameters of any functions master associated by default. The values ​are immutable(can only be changed through the specific functions master's configuration window).88