Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

CONFIGURATIONIntroductionAfter properly installing the Well-Contact Suite software, you need to perform some configurations to take advantage of all features.These operations will be described in detail in the next chapters and divided by theme.Some operations will be mandatory, regardless of the type of automation system you want to manage, while others may be run or not, depending on thetype of system you want to manage or specific feature requests.Some configuration tasks can be performed only by software users with high privileges to access the software itself (see the chapter Viewing and editingthe levels of software access), while others may be performed by software users with lower privileges.These differences are due to different severity of the problems that may arise in the management of the automation system due to incorrect configuration,and then consequently to the different degree of expertise required for different types of configuration.In the following description of the system configuration, if necessary, the level of privilege required to perform the operation in question will be specified.First start of the Well-Contact Suite softwareAfter installing the software Well-Contact Suite and restarting the system (as required by the installation) you can start the software using the following iconon the Windows desktop.or using the link to the application included in the Windows programs menu.Make sure you have correctly plugged the hardware key that came with the software to your system.In the event that the Well-Contact Suite software does not detect the presence of a hardware key compatible with the software you are trying to run, anerror message will appear as shown below.Pressing the "Close Program" button, the software will be closed.Pressing the "Continue" button the software will check for the presence of the hardware key again; you can press it, then, if you want the software tocheck for presence of the hardware key again, after having plugged it or checked for proper plugging of the key.In the event that the hardware key is properly installed on your computer and is compatible with the software you are trying to run, the window for enteringthe user login information appears.28