Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Changing the visibility of the graphical symbols of the devicesIntroductionAs previously mentioned in the chapter Address/Object configuration, you can change the appearance and behavior (using the mouse) of the graphicalsymbols representing the devices/objects/addresses included in the detail views of the environments .In such chapter we have dealt with the changes to the views on a "global" level, i.e. those changes that are applied to all the addresses of the same typeand with the same features. We also mentioned that, regardless of the "global" settings, you can make "timely" changes to a in specific detail view of anenvironment. These "timely" changes are carried out using the procedures described in this chapter.Such possible changes are summarized by the following points:• Changing the background of the detail window of an environment.• Changing the visibility, the display mode, and the action linked to the left mouse button on the graphical symbols in use• Adding graphical symbols to devices that are not present in the environment you are customizing.• Deleting graphical symbols from the detail view in question.To access the customization graphical features here described, go to the "Edit Supervision" window which is activated by pressing the "Edit" button, asdescribed below.The window "Edit Supervision" appears, as shown in the figure below.196