Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

In the graphical symbol you can distinguish the following three areas:• Top horizontal barThis area shows the status of the data reported in the following table.Graphical Data DescriptionNumberof the environmentNameof the environmentAlarmsin the environmentIt's the number of the environment.Please note that for the proper functioning of the Well-Contact software you'll need to configureall environments numbers during the configuration of the Well-Contact Suite software.It is a text field that displays the name of the environment (if you have entered it during theconfiguration of the Well-Contact Suite software).This data can be displayed or hidden using the "Show optional description" button ( ).If an alarm event occurs, associated with the environment, you'll see an icon for the type ofalarm that occurs.If multiple alarm events occur simultaneously, only one symbol is displayed, starting from theone indicating the most serious alarm (depending on the level assigned, during the configuration,to the specific alarm).Only after the higher priority alarm event has been solved, the symbol of the next (in terms ofseverity) alarm will appear.The following alarm symbols are provided:• : Request for assistance from the customer• : Fire Alarm• : Technical alarm• : Intrusion Alarm• : Flooding danger alarm• : Temperature is too high alarm• : Temperature is too low alarm• : Service in room request alarm• Area of the summary symbols of the thermostats in the common areaFor each thermostat in the environment is placed, in this area, the summary graphical symbol of the Vimar's Well-Contact system's thermostat.In the automatic mode, the Well-Contact Suite software composes the summary symbol of the environment entering as many " thermostatmodules" as the actual thermostats installed (and configured) in the environment.The summary representation of the Well-Contact system's thermostat provides the display the following information:• Description. It is a text field that displays the description of the thermostat (if it was entered during the configuration).This field is very important if there is more than a thermostat in the environment, to be able to distinguish them.• Measured temperature. It is a numeric field that displays the temperature measured by the thermostat.• Set Temperature. It is a numeric field that displays the set temperature.• Manual setting status (local). This field displays the symbol of a "hand" if you have made any changes to the set temperatureand/or speed of the fancoil through the buttons on the thermostat, when in "Comfort" operating mode.• Operating mode of the thermostat. This field displays a graphical symbol that identifies the operating mode of the thermostat.72