Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Inserting an environment in an areaYou can add (associate) an environment in a specific area, using the technique of drag & drop:1. Press and hold the left mouse button on the environment that you want in a given ZONE that should be visible (if not, proceed with the operationof "expansion" of the levels, as described in the chapter The "ZONE" section).2. "Drag" the environment to the representation of the ZONE (ZONES section) where you want the environment to be inserted.3. Release the left mouse button. The environment now appears also in the section ZONES.Note that whatever the zone an environment belongs to, it will appear in the same way in the ENVIRONMENT section.Deleting an environmentYou can delete an environment from the representation of the system.IMPORTANT: Please note that the deletion of an environment also leads to the deletion of all its references in other parts of the Well-Contact Suite software(reservations management, supervision management…).The deletion, once executed, cannot be undone.To delete an environment from the "ENVIRONMENTS " proceed as follows:1. Right-click the environment you want to delete. A menu appears.2. Select "Delete selected item", as shown in the picture below.3. Since deleting an environment has implications in many parts of the Well-Contact Suite software, before deleting the environment a window toconfirm the requested operation is displayed.91