Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

3. If the operation has been confirmed, the configured address appears in the "System Date - Time - Code" window and the operation is completed.Enter the date updateTo send a date update to the system from the Well-Contact Suite software, left-click "Update Date", as shown in the picture.System devices time updateAfter putting the system in service you'll need to set the time on all devices that use it for their proper functioning.The transponder readers are definitely among the devices of the Well-Contact system using such information. Without such information, in fact, accessmanagement cannot be done properly.In addition to the required "initial setting" of the time on all devices that use it, to ensure a good synchronization between all devices in the system, we recommendenabling the periodic sending.In fact, you may experience malfunctions due to possible drifts in the time measurement of the various devices in the system.From the perspective of the ETS configuration, a global group address (single group address associated with propertyID 18 of all transponders (readersand pockets)) will have to be dedicated to sending this data to all the devices that need it.49