Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Environment DescriptionIn this field you can enter an alphanumeric string that can be used (optionally) to identify an environment, which is displayed in the supervision windows.This field can be used, for example, when the rooms of a structure are also identified by a name such as, for example, "Blue Room".From some windows of the supervision section of the Well-Contact Suite software, you can decide whether or not view the room description strings.IMPORTANT: For the rooms, the description string is not a substitute for the room number, which must be defined in any case.Configuring the "Functions Masters"From "ENVIRONMENTS" it's also possible to set the "Functions Master".For a detailed description of the "Functions Master" refer to the chapter "Functions Master".The configuration operations on the functions masters, related to the configuration of the devices are listed below:• Creation• Display• Deleting a functions master• Deleting an item from a functions master• Editing Parameters• Assigning a master to set the default valuesYou can create two types of functions masters:• Functions masters of the "thermostat" type• Functions masters of the "Address/Object" typeCreating a functions masters of the "thermostat" typeA functions masters of the "thermostat" type may be regarded as a virtual thermostat associated with a real set of thermostats to be controlled simultaneously.The virtual thermostat settings will be sent to all the real thermostats associated with it.To create a new "functions master" of the "thermostat" type proceed as follows:1. Right-click the row corresponding to "Functions Master".A menu appears.2. Select "New Functions Master"94