Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

3. "Alarm Specifications" section (which is only displayed when "Alarm" is selected in the "Type" field of the "Selected Logic/Alarm Detail" section),where the following configuration parameters are displayed and can be edited:a. Alarm Type. Defines the type of alarm you are setting. You must be a select one of the configured types of alarm from a menu.The Well-Contact Suite Software provides a list of all the configured types of alarm. For each type of alarm you can define a set ofdata that will be described belowThis list can be changed according to user specifications (see chapter Alarm types definition).b. "Alarm types definition" button. Activate the window display that lets you edit the list of types of alarm (see chapter Alarm typesdefinition).c. Associated Environment. You can assign an alarm event to a specific environment. If an alarm is associated with an environment,the messages of alarm notification by the Well-Contact software suite will also contain the information associated with theenvironment.d. Reset Address. It is the address where the Well-Suite Contact software can send a value of 0 (zero) to be used to restorethe condition of "standby" to the device that triggered the alarm. This procedure is required by some devices. Refer to thespecifications for the device that generates the alarm to assess the need to use this optional feature.e. "Define" Button. It activates the window view that represents the tree of defined addresses, from which you can choose theReset address.The window with the representation of the addresses is displayed below.147