Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

The actions you can choose from the selection window depend on the selected address. Only the choices that can be made for the selectedaddress are suggested. The last picture shown relates to the default actions that can be set for a "Light ON-OFF" type of address.2. From the selection window, choose the desired default action. To close the window without making any changes to the current settings,press "Cancel".Here are two examples to describe the meaning of this field:• EXAMPLE 1: Consider an address used to control an electric lock. The command to be sent is "ON" and the "OFF" commandmakes no sense. In this case, it will be associated with the action "ON", so that each (left) click sends the command "ON" to theelectric lock with the purpose to open the door.The default actions for an address such as "Electric lock" are the ones shown in the picture below.• EXAMPLE 2: Consider an address used to control a lamp. The command to be sent is "ON" if the current status is "OFF", or"OFF" if the current status is "ON", i.e. you want the status to be switched (between ON and OFF) with each (left) click on the iconof the lamp. In this case will be associated with the action "Switch" (NOT of the current value).The default actions for an address such as "Light ON-OFF" are the ones shown in the picture below.If you set the action "On=1", the command "ON" would be sent to the lamp with every click of the mouse.If you set the action "Off=0", the command "OFF" would be sent to the lamp with every click of the mouse.If you set the action "No Action", no action would be taken by the Well-Contact Suite software with every click of the mouse.189