Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

INSTALLATIONSystem RequirementsTo install and run the software, you'll need:• A Personal Computer (defined below as PC) with Atom XXXX processor or higher.• A PC with 1 Mbytes of RAM (2 GB or more recommended).• If your PC's Operating System is Microsoft Windows Vista or Microsoft Windows Seven, to install the software and use it subsequently, are required:- PC with dual core processor (Quad Core recommended)- PC with 2 GBytes of RAM (3 GB or more recommended)• A PC with 1 GB of hard disk storage.• An interface for the connection to the KNX bus.This interface is necessary so that the software can communicate with the devices on the automation system. If such interface is missing, the softwaremay still be installed and started, but you won't be able to supervise the devices on the automation system.The lack of communication with the KNX bus is reported by the software indicator.• Network interface controller connected to a working LAN. The controller is not required if both the following conditions are verified:- There's no need for additional clients.- There's no need for interfacing with third-party management software installed on other PC via TCP/IP.Software RequirementsOperating systems compatibilityThe software is still backward compatible with the following operating systems (1) : Microsoft Windows XP SP3 (2) (Professional and Home), MicrosoftWindows Vista SP1 (Home Basic, Home Premium, Ultimate, Business, Enterprise), Microsoft Windows Server 2003 R2, Microsoft Windows Server 2008,Microsoft Windows Server 2008 R2Third-party software componentsThe Well-Contact Suite software uses some third-party software components which will be installed during the setup of the Well-Contact Suite software, ifthey're not already on the computer.Below is the list of such software packagessoftware product manufacturer functionMicrosoft .NET Framework 1.1 Microsoft FrameworkMicrosoft .NET Framework 2.0 SP2 Microsoft FrameworkMicrosoft .NET Framework 3.5 Microsoft FrameworkMicrosoft SQL Server 2005 Express Edition SP3 Microsoft Database ManagementKNX Falcon Driver v2.0 KNX Association Access to KNX bus managementSentinel hardware key driver SafeNet Hardware keys managementInstallation topologiesDepending on the type and size of the hotel where the automation system and its monitoring software are installed, you can use different topological structures,which are described below.Single control pointThis topological configuration is typical of the facilities where there is a single control point and the PC that communicates with the automation system busis located at the control point.The topological pattern is represented by the following picture:16