Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

The detail view window of a zone master appears as shown in the picture below:To the detail view of a zone master you can give the appearance of a real environment, though it's actually a virtual environment. The virtual environmentcontains symbols of the devices, which are also associated with a virtual set of real devices (of the same type) belonging to the real environments.Operating a virtual device, you're actually operating all devices associated with it: the Well-Contact Suite software sends the command the user gives tothe virtual device to all real devices associated with it.In that regard, please note that after giving an order to a virtual device, the commands to the real devices are sent from the Well-Contact Suite software ina sequence, respecting the time interval between a command and the next, as set during the configuration.Until the completion of the procedure of sending of commands to all devices associated with the virtual device, you cannot send a command to a master.If you try to send such a command to a master before the execution of a previous command is completed, you'll see the following warning message.In this case, you'll have to wait before sending a subsequent command to the master.The symbols on the virtual devices (which are functions masters) are similar to those on the real devices with one major difference:The symbols on the virtual devices (functions masters) cannot display the status. This is because they are associated with a set of realdevices that could have a different status from one another.The main purpose of the masters, however, is to send the same commands to a consistent set of devices, regardless of their status.To send a command to a virtual device (functions master), select (left click) the graphical symbol that represents it, exactly as you would to control realdevices.Sending a Command to a virtual On/Off deviceProceed as follows:1. Left click with the graphical symbol that identifies the virtual device (functions master) that represents the real devices you want to give thesame command to.96