Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Here follows the table with the symbols displayed and the related operating modes of the thermostat.Graphical SymbolThermostat ModeComfortStandbyEconomyAnti-freezeToo HotOFF• Bottom horizontal bar. This area shows the data described in the following table.Graphical Data DescriptionPresence of user card ina pocket readerPresence of staff card ina pocket readerDo Not DisturbIf a pocket transponder reader is installed in the environment (usually installed in hotel rooms to handle the"presence"of users (or staff) in the room and usually not installed on tertiary sector's systems), it is possible toview the information related to the user card inserted in the pocket transponder.If a pocket transponder reader is installed in the environment (usually installed in hotel rooms to handle the"presence"of users (or staff) in the room and usually not installed on tertiary sector's systems), it is possible toview the information related to the user card inserted in the pocket transponder.Although it isn't generally used in the tertiary sector, if the device is configured with such function (using theKNX ETS software), you can view the "Do Not Disturb" information.Note : In order for the above statuses to appear, it is necessary that the Well-Contact devices are configured correctly during the setup of the systemthrough KNX ETS and, where required, during the next phase of the Well-Contact Suite software configuration.Access to the detail view of the environmentSelecting (left clicking) the symbol representing an environment, you'll access the "detail view" of the environment. The "detail view" of the environment isdescribed in the chapter "The detail view of the environment".73