Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

The function masters are used in two ways:• To send the same commands to a set of devices of the same type.Operating the user interface of the function master (which includes all the commands for the device to which it is associated) is like operatingthe user interfaces of the real devices.For the sending of commands, a real device can be associated with more than a function master of the same type.• To set the default values ​of the data about the use of a set of devices of the same type.For a device you can define one and only one of the associated function master for the setting of its default parameters, which can be setautomatically by the Well-Contact Suite software under certain (default) conditions.The "Zone Master"A zone master can be seen as a "virtual" environment which contains functions masters.The following picture schematizes the situation.In the figure above the zone master contains four functions masters:• Functions Master A: Through this function master you can control the thermostats in rooms 1, 2, .., 20.• Functions Master B: Through this function master you can control the lights in rooms 1, 2, .., 20.• Functions Master C: Through this function master you can control the devices "A" (of a generic type) in rooms 1, 2, .., 20.• Functions Master D: Through this function master you can control the thermostats in rooms 21 and 22.A zone master can be used (but not necessarily) to provide a virtual representation of a set of environments (zones) with the same characteristics, in termsof the installed devices you want to control in the same way.12