Software Well-Contact Suite Office Linee guida ed ... - Vimar S.p.A.

Press "Open" to confirm the selection of the file, or "Cancel" to close the file selection dialog box without making a selection.2. Press the "Import" button to begin the process of importing the automation system configuration data from the file exported from ETS4.After pressing the "Import" button before importing the data, a warning message appears. To continue importing the data, accept the request.3. After some time, which depends directly on the system size (and therefore the number of devices), if the import operation is successful, the followingwindow appearsPress the "OK" to exit the file import from ETS4.In the event that the software does not detect the selected files, an error message will display and the import procedure will end. If this is the case, it willbe necessary to verify the correctness of the operations performed on the KNX ETS4 software, which led to export the required file.After making sure the export of the file has taken place correctly, repeat the import procedure as described in this chapter.123