iCys User Guide

May 6, 2005 Installing iCys Research Imaging Cytometer
Electrical Requirements
Specifications
Table A-1: iCys Physical Space Requirements (Continued)
Autofocus
Control unit (if
AutoFocus
installed)
Laser cooling
fan
Laser power
supply
❑ Width 14 in. (36 cm)
❑ Depth 11 in. (27 cm)
❑ Height 4 in. (10 cm)
❑ Width 9 in. (23 cm)
❑ Depth 9 in. (23 cm)
❑ Height 9 in. (23 cm)
Laser cooling fan can be placed up to 6 ft. (1.85m) from the
Analysis Unit. For isolation from vibration, do not place
laser cooling fan on the same table as the Analysis Unit.)
❑ Width 9 in. (23 cm)
❑ Depth 12 in. (31 cm)
❑ Height 6 in. (16 cm)
Laser power supply can be placed up to 6 ft. (1.85m) from
the Analysis Unit. For isolation from vibration, do not place
laser power supply on the same table as the Analysis Unit.)
Color camera ❑ Width 2.5 in. (6 cm)
❑ Depth 2 in. (5 cm)
❑ Height 7 in. (18 cm)
Camera
monitor
Brightfield
power supply
EpiFluorescence
power supply (if
installed)
❑ Width 17 in. (43 cm)
❑ Depth 17 in. (42 cm)
❑ Height 21 in. (53 cm)
❑ Width 3 in. (8 cm)
❑ Depth 8.5 in. (22 cm)
❑ Height 5 in. (13 cm)
❑ Width 5 in. (13 cm)
❑ Depth 11.5 in (30 cm)
❑ Height 7 in. (18 cm)
The table below lists the power requirements for the iCys system.
Table A-2: iCys Power Requirements
Component Voltage Current Frequency
Cytometer 120VAC
or 230VAC
16 A
10 A
60 Hz
50 Hz
Revision B iCys Research Imaging Cytometer User Guide A-3