iCys User Guide

Using the iNovator Toolkit iNovator-specific Protocol Modules
Event
Scan Area Event
The Scan Area Event module is used only in the first scale of a two-scale scan. It
generates two important outputs: events and Dynamic Scan Areas.
The event output is similar to that of the event module. The output of a contour
module provides input and this module produces events for that component. Those
events may be treated as any other event.
The second output, Dynamic Scan Areas, are scan areas that are subsequently scanned
in the second scale scan. For a description of two-scale scanning and how this module
is utilized as a part of that process see the section entitled “Multi-scale Scanning” on
page B-30.
When the Scan Area Event module is selected the following options appear.
B-24 iCys Research Imaging Cytometer User Guide Revision B