iCys User Guide

iCys Cytometric Analysis Software Application Overview iCys Status Bar
iCys Status Bar
Action WS Run Active Disk space XYZ
The iCys status bar, at the bottom of the iCys window, displays the following
information:
❑ Action—The current action, if any, being performed. These may include:
❍ Ready
❍ Test
❍ Scan & Save Data
❍ If a run is paused, the action field will be followed by the word Paused.
❑ WS—The name of the currently open Workspace.
❑ Run—The Run number and name of the Run being saved.
❑ Scan Progress—The first section of Scan Progress shows the field being scanned,
in the format xx of yyy where:
❍ xx— Number of fields scanned.
❍ yyy—The total number of fields in this scan.
The second part of Scan Progress in brackets reports:
❍ If a microtiter plate is being used, the information in brackets indicates the
identity of the well being scanned and the field being scanned in that well, in
the format [XY, FZ], where XY indicate the well being scanned, and FZ
indicate the field.
❍ If a freeform carrier such as a slide is being used, the bracketed information
indicates the room number of the slide and the field number being scanned.
For information on freeform carriers see page 2-12 of this manual.
❑ Active—Indicates the currently active scan area whose data are displayed in the
graphs and image windows.
❑ Scan—For repetitive scans only, described in “Setting Up a Repetitive Scan” on
page 3-32, displays a scan count in the format x of yy where:
❍ x— the number of scans performed. Except in the case of repetitive scanning,
this number will be 1.
❍ yy—the total number of scans requested.
Scan progress Processing scan images
Laser power
3-8 iCys Research Imaging Cytometer User Guide Revision B