B - Ardiehl.de

BUCKET POSITION VALVE (Optional)
Removal and Installation
Remove the steering levers/front panel assembly. (See
Page 3–1.)
Remove the lift lock valve. (See Page 8–1.)
Mark all the tubelines for correct assembly.
Disconnect the tubelines (Items 1 & 2) [A] from the tee
fitting at the bucket position valve.
Disconnect the tubeline (Item 1) [B] from the control
valve.
Disconnect the two tubelines (Item 2) [B] at the rear of the
bucket position valve.
Remove the two mounting bolts and nuts (Item 3) [B].
Installation: Tighten the mounting bolts and nuts to
15–16 ft.–lbs. (20–22 Nm) torque.
Remove the bucket position valve [C].
Always clean up spilled fuel or oil. Keep heat,
flames, sparks or lighted tobacco away from
fuel and oil. Failure to use care around
combustibles can cause explosion or fire
which can result in injury or death. W–2103–1285
–2–64–
A
2
B
C
1
1
3
2
P–04744
P–04746
P–04756
853, 853H BICS Loader
Service Manual