B - Ardiehl.de

STEERING LEVERS (Cont’d)
Adjusting the Wheel RPM Forward Compared to
Reverse Travel
Read this adjustment completely to become familiar with
the procedure before beginning the adjustment.
NOTE: This procedure adjusts the position of the
steering levers in the panel when in neutral.
Levers centered in steering panel give equal
travel forward compared to reverse.
1. Disconnect the two bolts of the pintle links (both
sides) (Item 1) [A].
2. Fully lower steering lever stop and tighten (both
sides) (Item 1) [B].
NOTE: Before measuring, move the steering lever a
small amount to be sure the cam is in the
detent pocket with no freeplay.
3. Move the lever to full forward, measure the distance
from the U–bolt to the lock nut. Record this
measurement [C].
EXAMPLE ONLY: 3.66 inch (82 mm)
4. Move the lever to full reverse, measure the distance
from the U–bolt to the lock nut. Make a record of this
measurement [D].
EXAMPLE ONLY: 2.76 inch (70 mm)
Revised June 96
A
B
C
D
3.66 inch
(93 mm)
2.76 inch
(70 mm)
1
FORWARD
REVERSE
P–07927
P–02875
MC–01944
MC–01943
853, 853H BICS Loader
–3–11– Service Manual
1