B - Ardiehl.de

STANDARD INSTRUMENT PANEL
Removal and Installation
Pry the rubber light mount loose from the operator cab
(both sides) [A].
Lower the light from the operator cab and locate the three
instrument panel mounting bolts (Item 1) [B] (both sides).
Remove the three mounting bolts (Item 1) [B].
Installation: Be careful not to overtighten the instrument
panel mounting bolts to prevent stripping the threaded
holes in the panels.
Pull the left instrument panel down and disconnect the
wire harness connectors from the panel. Remove the
panel [C].
Repeat steps [A] and [B]. Pull the right instrument panel
down and disconnect the wire harness connectors from
the panel. Remove the panel [D].
Reverse the removal procedure to install the instrument
panel.
–6–18–
A
B
C
D
1
1
P–03995
P–03955
P–03951
P–03953
853, 853H BICS Loader
Service Manual