B - Ardiehl.de

HYDRAULIC PUMP (Cont’d)
Removal and Installation
When making repairs on hydrostatic and
hydraulic systems, clean the work area before
disassembly and keep all parts clean. Always
use caps and plugs on hoses, tubelines and
ports to keep dirt out. Dirt can quickly damage
the system.
I–2003–0284
Raise the operator cab. (See Page 1–1.)
Drain the hydraulic reservoir. (See Page 1–1.)
Disconnect the hose (Item 1) [A] from the pump outlet.
Install a cap on the fitting.
Disconnect the hose (Item 1) [B] from the pump inlet.
Disconnect the second hose (Item 1) [C] from the pump
inlet.
Remove the pump mounting bolts (Item 1) [D].
Remove the hydraulic pump.
Always clean up spilled fuel or oil. Keep heat,
flames, sparks or lighted tobacco away from
fuel and oil. Failure to use care around
combustibles can cause explosion or fire
which can result in injury or death. W–2103–1285
–2–46–
A
B
C
D
1
1
1
1
P–04869
P–04865
P–04857
P–04866
853, 853H BICS Loader
Service Manual