B - Ardiehl.de

FRONT PANEL
Removal and Installation
Put jackstands under the front axles and rear
corners of the frame before running the engine
for service. Failure to use jackstands can allow
the machine to fall or move and cause injury or
death.
W–2017–0286
Raise the lift arms and install an approved lift arm support
device. (See Page 1–1.)
Raise the operator cab. (See Page 1–1.)
Remove the mounting bolts (Item 1) [A] from the throttle
lever.
Disconnect the linkage rod (Item 1) [B] from the throttle
lever.
Hold the lock nut and remove the knob (Item 1) [C] from
the lift lock valve.
Disconnect the wire harness connectors (Item 1) [D]from
the steering lever wire harness.
NOTE: The 853 without front auxiliary hydraulics
does not have electric control handle.
Remove the right side steering shock (Item 2) [D].
Revised June 96
A
B
1
C
D
2
1
1
1
P–04731
P–04735
P–04733
P–04737
853, 853H BICS Loader
–3–5– Service Manual