B - Ardiehl.de

HYDRAULIC CONTROL VALVE (Cont’d)
Lift Spool Detent (Cont’d)
Remove the detent sleeve, detent balls and spring [A].
Remove the spool, centering spring, backup washer, seal
and spool assembly from the control valve [B].
At the other end of the spool bore, remove the backup
washer and seal [C].
Put the linkage end of the spool in the vise [D].
NOTE: Be careful when removing the detent adapter,
because there is spring pressure.
Loosen the detent adapter [D].
–2–36–
A
B
C
D
CD–15042
CD–15043
CD–15044
CD–15045
853, 853H BICS Loader
Service Manual