B - Ardiehl.de

HYDROSTATIC PUMP (Cont’d)
Removal and Installation (Cont’d)
Remove the two mounting bolts (Item 1) [A] and nuts
(Item 1) [B].
Installation: Tighten the mounting bolts and nuts to
65–70 ft.–lbs. (88–95 Nm) torque. Make sure the key
(Item 2) [A] is installed.
Remove the mounting bolt (Item 1) [C] at the hydraulic
pump end of the pump.
Remove the hydrostatic pump from the mounting bracket
and drive belt housing.
Revised June 96
–3–28–
A
B
C
1
1
2
1
1
P–04933
P–04935
P–04946
853, 853H BICS Loader
Service Manual