B - Ardiehl.de

HYDROSTATIC PUMP (Cont’d)
Assembly (Cont’d)
Apply oil to the guide and swashplate. Install the guide
onto the swashplate with the guide offset positioned to
provide clearance for the journal bearing [A].
Install the swashplate into the housing [B].
Adjust the swashplate so that the guide engages the
piston.
Center the rotating group and swashplate over the needle
bearing.
Check that the spherical washer is on top of the three
pins.
Apply oil to the bearing and shaft. Install the shaft and
bearing assembly into the end housing [C].
Install the snap ring [D].
–3–52–
A
B
C
D
CD–00099
CD–00072
CD–00089
CD–00088
853, 853H BICS Loader
Service Manual