B - Ardiehl.de

PARKING BRAKE DISC (Cont’d)
Removal and Installation (Cont’d)
Remove the center chaincase cover/disc guides
assembly [A].
Installation: Make sure the brake discs go between the
disc guide slots.
NOTE: *Later serial number machines do not use
disc guides (Item 1) [A]. A snap ring is used
on both sides of disc to limit disc movement
on these machines.
*Later design (no disc guides)
853 (S/N 508418265 & Above)
853H (S/N 509718407 & Above)
853 (S/N 512821967, 22021, 22028 & Above)
A snap ring pliers with 90° tips is needed for removing the
brake disc snap ring.
Remove the snap ring from the end of the disc hub (Item
1) [B] (both sides).
Slide the brake disc (Item 1) [C] of the disc hub and
remove from chaincase.
Inspect the brake disc guides for wear or damage and
replace as needed.
The brake disc guides can be replaced by removing the
guide mounting bolts (Item 1) [D].
Revised June 96
–4–6–
A
B
C
D
1
1
1
1
P–04781
P–04783
P–04782
P–04851
853, 853H BICS Loader
Service Manual